Standards
Down
Standards
| Model | Vulcan-sCL PE4 DBase Plus |
| Camera Link Mode | Base/Dual-Base |
| Interface Standard | Camera Link 2.0 |
| Pixel Dept | 8/10/12/14/16 bit |
| Tap Arrangement |
1 Tap: 8/10/12/14/16bit Mono/Bayer 1 Tap: 8bit RGB/BGR 2 Taps: 8/10/12/14/16bit Mono/Bayer |
| Scan Type | Area scan / Line scan |
| Resolution Support |
Level（min/max): 128 byte / 64k bytes; Vertical(min/max): 1 line /(Area array 256M/horizontal resolution), (Line scan unlimited) |
| Pixel Clock | 20-85MHz |
| Onboard Memory | 512 MB |
| Output Data Rate | 850 MB/s(max) |
| Communication Method |
Support computer serial communication; 1200-921600bps |
| Trigger Input |
Support 2 signals inputs(photoelectric isolation); Maximum frequency 68kHz; Level standard supports RS422; TTL and differential input (3.3-24V) |
| Encoder Input |
Support 1 orthogonal AB phase input (photoelectric isolation); Maximum frequency 2MHz; Level standard supports RS422; TTL and differential input (3.3-24V) |
| Inter-board Synchronization |
Support multi-card synchronization (up to 4 capture cards); The synchronization delay is less than 25ns |
| Flash Control |
Support 2 signal output (photoelectric isolation); Maximum frequency 40kHz |
| Secondary Development | Complete SDK packages; Supporting C/C++/C# language |
| System Requirement |
Operating Windows 10/7(64-Bit/32-Bit), Linux 64-Bit, Mac OS; Hardware: PCIe 2.0 × 4 Slot |
| Connector | SDR |
